Bosch 127lb High Imp Injector Ev1

Description

127lb/hour 1330cc Bosch Fuel Injector with EV1 Connector 60mm osch 127lb/hour Fuel Injector w/ EV1 Connector Genuine Bosch High Impedance Injectors These injectors flow 127 lbs/hr at 58.0 PSI ( 4 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed drive ability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. Many tuners push these injectors to 6 bar and higher. Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow. Features: Genuine, reliable Bosch Injectors Excellent response characteristics Robust Design High Impedance Low Impedance performance characteristics with High Impedance Compatibility 

Specs

  • Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
  • Spray Pattern: Spray Cone, (single hole orifice)
  • Electrical Connector: EV1/Minitmer Fitted with Viton upper and lower o-rings.
  • Static Flow Rate: @ 58.0PSI (300kPa): 127.0 lb/hr
  • Overall Length: 64mm
  • Dimensions: 64mm o-ring seat to seat, 60mm o-ring