Miata MS3Pro PnP Plug and Play

$1,199.00

Miata MS3Pro PnP Features:

Fully Plug and Play Installation – No wiring required for basic functionality.
- Average install time is under 1 hour!
Base map is pre-loaded to help your engine start on the first turn of the key
Real-time tuning and data logging with a laptop connection
8 GB internal data logging with built-in SD card
Supports most aftermarket wideband sensors

16×16 Fuel Tables allow high-resolution tuning
16×16 Ignition Tables
Multiple Acceleration enrichment strategies
Closed Loop Idle Speed Control
Air Conditioner Control
4 sequential fuel injector channels with individual trim tables
Onboard peak and hold drivers support both high and low impedance injectors – No external ballast resistor is needed!
Allows removal of the stock airflow meter

12×12 Air Fuel Ratio Target Tables for use with a wideband O2 sensor for precise tuning and table trim.
VVT support if swapping to a later VVT motor
Programmable voltage regulator control for NB alternator swaps
Multiple traction control strategies
Built-in 3-step rev limiter / launch control with flat shift and burnout rev limiter
Real time barometric correction
Internal 4-bar MAP sensor reads up to 44PSI of boost
Overboost protection
Closed loop boost control (Requires EBC solenoid kit – stock boost control solenoid does not allow adjusting boost level)
Rally style anti-lag
Water injection control – on/off or variable
Knock sensor input with adjustable sensitivity, crank angle windowing, and more
Table switching input. Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.
Input for flex fuel sensor – switch between E85 and gasoline on the fly!
CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors…..the possibilities are limitless!

What you get in the box: